Update:

Tacoma gen 1 Adapters are for sale!

Go to killertoytops.com

Items needed from Capivara are:

1. Adapter set Part number 4RTACO.
2. If you have ABS then an axle shaft set is required. The stock ABS sensor stays in its stock location. The ABS tone ring is re-installed onto the new axle shaft.
3. Optional, but highly recommended is the brake line hard mount and cable lift bracket set.
4. Parking brake cables. A set can be purchased from Capivara or stock Toyota cables can be modified (4Runner Gen4 for the left cable and Sequoia gen1 for the right cable).
5. Parking brake mounting bracket kits. The kit requirements are different depending on whether you use the Capivara cable set or if you use modified Toyota cables.
6. Speed sensor hole covers may also be needed and are available.

Additional items needed are bearings, brakes, hardware, etc. The list is on the pdf below. They can all be sourced from a used vehicle, purchased new aftermarket, or purchased new from any Toyota dealership. A video will be published soon detailing the assembly of all part numbers. While the list is of all the individual part numbers, many of the parts can be purchased as kits.